 |
|
|
 |
|
|
|

|
|
 |
|
Introduction
The DeviceMaster RTS 2-Port 1E is a serial device server that can be used to network enable two serial devices on an Ethernet network.
The product provides screw terminal connections for each serial port and supports RS-232, RS-422 and RS-485 serial communications at standard baud rates from 300 bps to 230 Kbps.
A network switch provides two 10/100 ethernet connections with an RJ45 jack.
The product will accept power in the range of 5-30 volts DC through screw terminal connections.
A 100-240VAC power supply is also available.
|
|
 |
Highlights
- Proven DeviceMaster Performance
- Serial Communication Speeds up to 230Kbps per port.
- RS-232, RS-422, RS-485 software selectable interfaces
- Microsoft Certified Drivers for Windows Vista, XP and Server 2003
- Convenient DIN rail design
- Screw Terminal Connections
- Wide input power range
- RoHS Compliant
|
|
 |
System
Specifications
Hardware
Bus Interface Specification: 10/100BASE-T
Memory: SDRAM: 8MB, Flash 4MB
Enclosure: UL94-V0 PLASTIC
Installation Method: Din Rail (35mm)
LED Indicators: Ethernet Activity, Ethernet Link, Status
Electrical Specifications
DC Input Voltage: 5-30V
Current Consumption @
+24V: 60mA
Power Consumption (max): 1.5W
Device Driver Control
Data bits 7 or 8
Parity Odd, Even, None
Stop bits 1 or 2
Flow Control: Hardware, Software or None
Baud Rate: 300 to 230.4Kbps
Interfaces
Ethernet host interface 10/100Base-T
Communications Interface RS-232, RS-422, RS-485
Serial Communications
Connector type: (2) Screw Terminal Blocks
Software Interfaces:
RS-232 (TxD, RxD, RTS, CTS)
RS-422
RS-485 Half Duplex
RS-485 Full Duplex (Master/Slave)
|
|
 |
Ethernet Specifications
Network Protocols:
ARP, BOOTP, DHCP, HTTP, ICMP, Ping, RARP, RFC 1006 (ISO over TCP), RFC 2217, SNMP (MIB-II), TCP/IP, Telnet, TFTP and UDP Socket Services
Connector Type: 1 RJ45F Auto MDI/MDI-X
SNMP Support: Monitoring only

|
|
Environmental Specifications
Altitude 0 to 10,000 feet
MTBF 58.57 years
Operating Humidty (non-condensing) 5% to 95%
Air Temperature
System on -37 to 74 °C
System off -40 to 85 °C
Heat Output 5.0 BTU/Hr
Surge Protection Provides minimum of 25KV protection for all serial lines. All Ethernet components are rated to 1.5KV magnetic surge protection.

|
|
|
Physical Specifications
|
Product
|
weight
grammes |
dimensions
mm |
DeviceMaster RTS 2-Port 1E
(99481-7) |
130 |
111 x 99
x 23 |
|
|
 |
|
Agency
Approvals
Immunity EN55024, EN61000-4-2, EN61000-4-3, EN61000-4-4,
EN61000-4-5, EN61000-4-6, EN51000-4-8, EN61000-4-11
Emission
FCC Part 15 subpart B Class A limit
AS/NZS CISPR 22
European Standard EN55022
Canadian EMC Requirements ICES-003
Safety EN60950, IEC60950, CSA C22.2
No.60950/UL60950 Third Edition
Other: European Standard: 2002/95/EC Directive (RoHS), NEMA TS2 Compliant
Warranty
2 years
|
|
 |
|
Serial Connector Pin Assignments
|
|
|
|
|
|