Intergrator NSP-1


The Intergrator NSP1is a low cost single port RS-232/422/485 Serial to Ethernet converter.

Serial devices can be connected across a LAN or WAN using the Intergrator NSP-1.

Simply connect your serial device to the Intergrator NSP-1, link the NSP1 to the LAN or WAN and existing application software can now access the remote serial port as if it were locally connected.

Hardware Specifications

Power input:
9-24VDC
Power Consumption:
<200mA @ 12V

Device Driver Control
Data bits:
Parity:
Odd, Even, None
Stop bits:
1, 1.5 or 2
Baud Rate:
up to 115.2 Kbps
Flow Control:
Hardware or Software

Interfaces
Ethernet host interface:
10/100Base-T (10/100 Mbps - RJ45)
Communications Interface:
RS-232, RS-422, and RS-485
Interface Connector Type:
DB9 Male
Network Protocols:
TCP, IP, ARP, ICMP.

Environmental Specifications

Operating Temperature:
-20 to +75C
Operating Humidity:
5 to 95% RH
Storage Temperature:
-20 to 85C (-4 to 185F)

Physical Specifications

Weight:
140g
Dimensions:
66mm x 97mm x 25mm

Agency Approvals

BS EN55022:2206 + A1:2007 Class B Emissions Standard for Information Technology Equipment

BS EN55024 1998 Immunity Standard for Information Technology Equipment
BS EN61000-4-2 1995 ESD Requirements
BS EN61000-4-3 1996 Radiated Susceptibility
BS EN61000-4-4 1995 Electrical Fast Transient Burst Requirement
BS EN61000-4-5 1995 Surges Requirements
BS EN61000-4-6 1996 Conducted Susceptibility
BS EN61000-4-11 1994 Voltage Dips and Interruptions


Warranty
2 years