RocketLinx ES7506

p/n 32050-0

Comtrol's RocketLinx ES7506 product is designed for industrial PoE applications such as IP surveillance or wireless access points, where the power source is not conveniently located.

The RocketLinx ES7506 supports intelligent PoE control and schedule management.
Each of the four PoE ports can be configured in a weekly schedule by hourly basis and PoE on/off can be remotely controlled via SNMP and Web.

It is compliant to both IEEE 802.3af PoE as well as the pioneer standard of IEEE802.3at PoE Plus designed for boosting PoE delivery up to 30W in each of the four PoE ports.
The RocketLinx ES7506 can auto-detect 24V and 48V power input and can deliver 24V and 48V PoE outputs which allow more applications where 48VDC is not an option.

The two uplink ports can be configured as Redundant Ring ports recovering network failure in less than 5ms, or RSTP ports integrating with other standard switches.
Full network management features such as SNMP v3, QoS, IGMP v3 are all supported.
I
If the powered device fails to respond after a pre-configured time interval, the product will reboot the powered device and continue to monitor the powered device in every pre-configured time interval.
Also, unmanageable powered devices can be managed through the RocketLinx switch.

The IP-31 rigid aluminium flat casing and wide operation temperature range ensure reliable operation in places such as mass transit vehicles or outdoor useage.

• Four 10/100 TX Power over Ethernet ports and two redundant 10/100 TX uplink ports.
• DV 48V Power Input for IEEE 802.3af PoE output (IEEE 802.3af)
• Up to 30W per port for PoE plus High Power solution with DC55V Power Input (IEEE 802.3at)
• DC 24V Power Input for DV24V output throuhg Ethernet (Non-standard PoE)
• Up to 100W for total power budget
• Support IEEE 802.3af for PoE detection and PoE classification resistors
• PoE control and schedule by hour/weekly basis
• Auto-detect Powered Device status for device auto-reset (LPLD)
• Redundant Ring technology, back up system recovery time less than 5ms
• SNMP v1/v2c/v3, IGMP snooping v1/v2/v3, RMON, VLAN, QoS
• Network security by IP/MAC address, SSL and SSH
• Built-in hardware watchdog timer for system auto-reset
• Aluminium rugged enclosure with IP-31 grade protection
• Forced mode powering
• Wide operating temperature range (-25 to 60 degrees C)

Hardware Specifications

HARDWARE:
Bus Interface Specification:
10/1001000BASE-TX
Enclosure:
IP-31 Grade Aluminium Metal Case
Drop-Waterproof and Dustproof
Installation:
Panel Mount or DIN Rail Mount
LED Indicators:
Power 1, Power 2, Ring Master (R.M.)
10,100Base-TX Link / Activity Alarm
PoE Status
Dimensions:
162.56mm x 44.45mm x 135.89mm
Product Weight:
23.04oz

TECHNOLOGY:
Standard:
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-T
IEEE802.1p Class of Service
IEEE802.3af Power Over Ethernet (PoE)
IEEE802.1d Spanning Tree
IEEE802.1w Rapid Spanning Tree
Flow Control:
IEEE802.3x Flow Control and Back Pressure

PERFORMANCE
Switch Technology
32Gbps Switch Fabric
Store and Forward Switch Technology
System Throughput
14,880pps for 10Mbps
148,880pps for 100Mbps
Number of MAC Address
2K
Packet Buffer Memory:
1Mbits
Transfer Packet Size :
64 - 1552 Bytes (with VLAN Tag)
Priority Queues per Port:
4

Management Features

Configuration:
NetVision Utility, HTTP, HTTPS, SSH, SNMP V1/V2C/V3, Traps, Web Browser, CLI Management, Admin Password, DHCP Client, status, Scheduling, TFTP/HTTP/NetVision update for firmware.
Management Security :
4 entries for web, telnet, SNMP management security.
SNMP Trap:
Provides Cold start, Warm start, Port event, Power event, Authentication failure, PoE trap and private trap for proprietary functions.
SNMP MIB:
RFC 1213 MIB II, RFC 1493 Bridge MIB, RFC 1757 RMON MIB, RFC 2674 VLAN MIB, RFC Ethernet like MIB, RFC 1215 Trap MIB, RFC 3621 Power Ethernet MIB, Private MIB
Firmware Upgrade:
TFTP, HTTP and NetVision
System Log:
1000 system entries for system or remote log server
Event Alarm Relay:
Relay alarm for Port link down, PoE, and system power events.
Quality of Service:
Quality of Service determined by port, Tag and IPv4 Type of Service
Class of Service:
IEEE802.1p class of service, with 4 priority queues.
DHCP:
DHCP Client and Server function with specified IP exclusion and MAC binding function.
Timer:
Supports Network Time Protocol (NTP) to synchronize time from NTP server
VLAN:
Port based VLAN
IGMP Snooping:
Supports IGMP Snooping v1/v2/v3 and IGMP Query v1/v2
IP Security:
IP security to prevent unauthorized access

Network Redundancy

Rapid Spanning Tree Protocol (RSTP):
IEEE802.1D-2004 STP and RSTP
IEEE802.1w Rapid Spanning Tree Protocol (RSTP)
Rapid Super Ring (RSR):
Failure recovery within less than 5ms
Rapid Dual Homing (RDH):
Inter-operational with higher level switches and RsTP protocol compliant

PoE Features

Standards:
IEEE802.3af Power Over Ethernet
IEEE802.3at High Power PoE
Number of PoE Injector Ports:
4
Maximum Power PoE Port (Max.)
12.9W @ 24VDC VIN (Non-standard PoE mode)
15.4W @ 48VDC VIN (IEEE802.3af mode)
30w @ 55VDC VIN (IEEE802.3at mode)
Total Power Budget:
Up to 100W (IEEE802.3at)
Standard PoE voltage Output:
IEE802.3af compliant
44-57VDC
Non-Standard PoE Voltage Output:
24VDC
PoE Control:
User-configuration for PoE enable, disable, or schedule-based PoE function
Smart Powered Device Alive-Check:
User-configuration to monitor real-time status of connected PD's. PoE port is reset to brinig a PD back to working state, if connected PD fails.
Real-time Status on Web Interface:
Real-time status on port status, PoE status, PD status.
Forced Powering:
Advanced feature to supply power to non-standard PoE devices that can't be detected as valid PD's.
Power Limit Control:
Standard mode for IEEE802.3af PD
Manual mode for user-configuration of power limit to IEEE802.3af standard PD
Ultra mode for user-configuration to perform at the 30W power limitation or forced powering mode for non-standard PD
PoE Schedule Control:
PoE ports are configurable as on/off by hourly/weekly basis. Each PoE port can be scheduled to activate / deactivate PoE power with different rules using web interface.

Environmental Specifications

Air Temperature
System On:
-20 to 70°C
System Off:
-50 to 85 °C
Operating Hyumidity:
5% to 95% (non-condensing)
Humidity: 5% to 95% (non-condensing)
MTBF:
28.53 years.

Electrical Specifications

DEVICE
DC Input Voltage:
24-55 VDC
Current Consumption without PD load:
+24VDC 330mA
+48VDC 170mA
Power Consumption (max):
8W (without PD load)
Power Connector:
1
Power Connector Type:
6-Pin screw terminal block
Power Input Redundancy:
Dual redundant independent power inputs
Reverse Polarity Protection:
Yes
Power Alarm Relay:
Alarm for power failure notification
Relay Rating:
1A Max. @ 24VDC

Serial Console Port Specification

Connector Type:
RJ45
Number of Ports :
1
Serial Interface:
RS-232 (TxD, RxD, GND)
Baud Rate:
9600bps
Device Data Control:
8 Data Bits
1 Stop Bit
No Parity
No Flow Control

Regulatory Approvals

Emissions:
Canadian EMC Requirement
ICES-003
European Standard EN55022
CISPR 22
FCC Part 15 Subpart B Class A limit

Immunity:
European Standard EN55024:
IEC 1000-4-2/EN61000-4-2: ESD
IEC 1000-4-3/EN61000-4-3: RF
IEC 1000-4-4/EN61000-4-4: Fast Transient/Burst
IEC 1000-4-5/EN61000-4-5: Surge
IEC 1000-4-6/EN61000-4-6: Conducted Disturbance
IEC 1000-4-6/EN61000-4-8: Magnetic Field
IEC 1000-4-6/EN61000-4-11: DIPS and voltage variations

Safety:
IEC 60950/EN60950 (LISTED)
CSA C22.2 No. 60950/UL69850 Third edition.

Other:
European Standard: 2002-95/EC Directive (RoHS)

Export Information

Packaged Shipping Weight:
34.24
Package Dimensions:
256.54mm x 177.80mm x 91.44mm
UPC Code:
7-56727-32050-0
ECCN:
5A991
Schedule B Number:
8517.62.0050