OmniConverter® 10G/Sx
Unmanaged 6 and 10 Port 10Gigabit Ethernet Switch
The OmniConverter 10G/Sx is an unmanaged, compact Ethernet switch that features two 1/10G uplink ports and four or eight 10/100/1000 RJ-45 copper user ports, enabling network distance extension with fiber cabling.
As a Layer 2 Ethernet switch, the OmniConverter 10G/Sx forwards frames based on their MAC addresses.
In Directed Switch mode, it directs multicast traffic, such as video, only to the appropriate uplink port, preventing multicast video from flooding other network ports.
The switch supports daisy-chain configurations and redundant uplinks, ensuring protection and sub-50ms restoration in critical applications in the event of an uplink failure.
With Dual Device mode, the 10G/Sx can operate as two independent and isolated Ethernet switches, providing separate data traffic paths between each uplink port and a group of user ports.
Configuring the 10G/Sx is easy with accessible DIP-switches, each labeled for convenience.
OmniConverter switches feature Small Form Pluggable (SFP) transceiver receptacle ports that support 10/100/1000BASE-T, 1000BASE-T, and 10GBASE-T copper transceivers, as well as 1G and 10G multimode or single-mode fibre, dual or single-fibre, and standard or CWDM wavelengths.
The compact OmniConverter 10G/Sx Ethernet switches can be wall-mounted, rack-mounted, or DIN-rail mounted using optional DIN-rail mounting clips. Power options include 2-Pin DC Terminal or external 100-240V AC adapters.
Features
- Unmanaged 1/10G Ethernet Switch
- Two 1/10G SFP/SFP+ transceiver uplink ports
- Supports copper and fiber SFP transceivers
- Supports speeds of 10M, 100M, 1G and 10Gbps using copper SFP/SFP+ transceivers
- Four or eight 10/100/1000 copper user ports
- Supports jumbo frames up to 10,240 bytes
- Uplink redundancy
- Dual Device mode for operating as two separate switches
- Directed Switch mode to prevent port flooding
- AC to DC Power Adapter or 2-Pin DC terminal
- Wall, Rack and DIN-rail mountable
- Fan-less design
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
- TAA, BAA and NDAA compliant, and Made in the USA
- Free 24/7/365 Technical Support
| Description | OmniConverter® 10G/Sx 10/100/1000BASE-T with 1/10G Uplink Ports Unmanaged 6 and 10 Port 10Gigabit Ethernet Switch | |
|---|---|---|
| Standard Compliances | IEEE 802.3 | |
| Regulatory Compliances (*Pending) | Safety*: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 (Magnetic Field) 30A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP20 Protection ACT: TAA, BAA, NDAA | |
| Environmental | REACH, RoHS and WEEE | |
| Frame Size | Up to 10,240 bytes | |
| Port Types | Copper: 10/100/1000BASE-T (RJ-45) SFP/SFP+: 10GBASE-X Fibre Transceivers 10GBASE-T Copper Transceivers 1000BASE-X Fibre Transceivers 1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers | |
| Cable Types | Copper: EIA/TIA 568A/B, Cat 5 UTP and higher Fibre: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm | |
| AC Power Requirements (Models with AC/DC Adapters) | 100 – 240VAC/50 – 60Hz 0.25A max at 115VAC 0.12A max at 230VAC | |
| DC Power Requirements (Models with DC Terminals) | 4 RJ-45 Ports: +12 to +57VDC; 0.81A @ 12VDC 0.20A @ 48VDC 2 Pin Terminal (isolated) | 8 RJ-45 Ports: +12 to +57VDC; 0.90A @ 12VDC 0.22A @ 48VDC 2 Pin Terminal (isolated) |
| Dimensions (W x D x H) | 6.28” x 5.2” x 1.5” (159.5 mm x 132.1 mm x 38.1 mm) | |
| Weight | 4 RJ-45 Ports: Module Only: 1.5 lb. (720 grams) Module with AC/DC Adapter: 2.0 lbs. (913 grams) | 8 RJ-45 Ports: Module Only: 1.6 lbs. (748 grams) Module with AC/DC Adapter: 2.1 lbs. (941 grams) |
| Operating Temperature | Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Extended: -40 to 75°C (-20°C AC cold start) Storage: -40 to 80°C | |
| Humidity | 5% to 95% (non-condensing) | |
| Altitude | -100m to 4,000m (operational) | |
| MTBF (hrs) | Module Only: 312,000 AC/DC Adapter: 100,000 | |
| Warranty | 5 year product warranty with 24/7/365 free Technical Support 2 year AC power adapter warranty | |
Dual Device Mode Application
This Dual Device feature is extremely useful when two isolated networks domains share a single network distribution location.
The example below depicts a scenario where the Administration (green) network and the Engineering (purple) network are sharing a single hub distribution location. Using the two uplinks and the Dual Switch mode facilitates using a single switch driving both the Administration and the Engineering workstations while maintaining isolation between the networks.
Daisy Chain Application
This example demonstrates the daisy chain capabilities of the OmniConverter switches. In this application each OmniConverter switch connects to its neighboring switches via its uplink ports. The daisy chain can continue to additional switches using this method of connectivity.
In this application, two locations are connected using the OmniConverter switches providing high speed connectivity between the workstations and the router.
