miConverter™ 10/100 PoE/D
10/100Base-Tx to 100Base-Fx Ethernet Media Converters with PoE Powering
Features
- Cost-effective, miniature 10/100BASE-T to 100BASE-X Ethernet media converter powered by PoE
- Supports 10BASE-T, 100BASE-TX, 100BASE-X and IEEE 802.3 specifications
- Compact and light weight
- Fixed fiber port supports multimode and single-mode dual fiber with ST, SC and LC connectors; and single-mode single-fiber with SC connectors
- SFP transceivers for standard or CWDM wavelengths
- RJ-45/PoE port supports Full/Half-Duplex auto-negotiation and MDI/MDIX auto-crossover
- LED indicators for RJ-45 and fiber port status
- User-selectable link fault detection modes facilitate quick fault detection, isolation and reporting
- Power-over-Ethernet (IEEE 802.3af PoE/PD) with redundant power options:
- Wide Range DC Power input 8-60VDC (2-Pin Terminal) or
- US, Universal and Country/Region specific AC power adapter (Barrel Connector)
- Available with or without integrated mounting brackets
- Models without integrated mounting brackets can installed in an 18-Module Powered Chassis
- Commercial (0 to 50ºC),Wide (-40º to 60ºC), Extended (-40º to 75ºC) and Industrial* (-40º to 85ºC) temperature ranges
- TAA, BAA and NDAA compliant, and Made in the USA
- Lifetime Warranty and free 24/7 Technical Support
* DC Terminal Model Only
The miConverter 10/100 PoE/D is a miniature 10/100 RJ-45 to 100Base-FX fibre media converter, that can be powered with Power over Ethernet (PoE) when connected to PoE switches and midspans.
It can also be powered with DC or AC power with an external power adapter, providing cost-effective copper to fibre connectivity solutions.
With its size, portability and low power consumption, it is the ideal solution for mission-critical field diagnostic applications, as well as fibre to the desktop / laptop deployments.
The RJ-45 port supports auto-negotiation and auto-crossover, and the 100Mbps fibre port operates in Full-Duplex mode.
Single and Multimode fibre are supported, along with ST, SC, LC and SFP fibre connectors.
Multimode models support distances up to 5KM, and singlemode up to 120km.
Single fibre models support distances up to 50km.
Manual configuration of the unit is available using DIP switches, allowing configuration of the speed and duplex mode of the copper port, and configuration of Link Modes, with Link Segment, Link Propagate, Remote Fault Detection and Symmetrical Fault Detection all supported.
The miConverter models can be standalone, or mounted in the 18-module power chassis to consolidate individual modules into a rack-mount form factor that can be deployed where multiple fibre-optic links are distributed from UTP switch equipment.
Fibre Distance Extension with PoE
PoE switches provide power and data via copper UTP cabling to devices such as VoIP phone, Wi-Fi Access Points and IP Cameras.
The example below shows the miConverter 10/100 PoE/D deployed to enable plug-and-play fibre connectivity from PoE switches.
The miConverter 10/100 PoE/D is powered by a UTP patch cable and converts the copper to fibre to connect to a remote PoE IP camera.
At the end of the fibre, an OmniConverter PoE power-sourcing media converter converts the fibre back to copper, and injects PoE (up to 60W) to power the camera.
Description | miConverter 10/100 PoE/D 10/100Base-T Copper to 100Base-FX Fibre Converter powered by PoE. | |
|---|---|---|
Standard Compliances | IEEE 802.3, 802.3af | |
| Regulatory Compliances | Safety: | UL, cUL, CE, UKCA |
| Environmental | RoHS, WEEE, REACH | |
Frame Size | Up to 2,048 bytes | |
Port Type | Copper: Fibre: | 10/100Base-T 100BASE-X (ST, SC, LC, SFP) |
| Cable Types | Copper: Fibre: | EIA/TIA 568A/B, Cat 5 UTP and higher Multimode: 50/125µm, 62.5/125µm Single-mode: 9/125µm |
| AC Power Requirements | AC Adapter | 100 – 240VAC/50 – 60Hz 0.03A @ 120VAC |
| DC Power Requirements | DC Input: DC Input (PoE)
| 8 – 60V DC 0.28A @ 9VDC – 2.5mm barrel or 2-Pin Terminal Connector 44 – 57VDC, 0.05A @ 48VDC (typical) via RJ-45 (Alternative A&B) |
Dimensions (W x D x H) | Plugin (mm): | 43.4 x 104.1 x 21.3 |
| Weight | Standalone w Adapter | 113.4 grams 340.2 grams |
Temperature | Commercial: Wide: Extended: Industrial: Storage: | 0 to 50°C -40 to 60°C -40 to 75°C -40 to 85°C -40 TO 80°c |
Humidity | 5% to 95% (non-condensing) | |
Altitude | -100m to 4,000m | |
MTBF (hrs) | Module Only: AC/DC Adapter: | 1,160,000 206,000 |
Warranty | Lifetime warranty with 24/7/365 free Technical Support | |