OmniConverter® GPoE+/S
10/100/1000 Media Converter with Power over Ethernet (PoE/PoE+) Enhanced Version
The OmniConverter GPoE+/S are PoE+ (IEEE 802.3at) multiport Ethernet media converters, featuring one or two uplink ports, and one or two 10/100/1000 RJ-45 PoE+ user ports.
Providing PoE+ power up to 30W, the OmniConverter GPoE+/S supports frame sizes up to 10,240 bytes, and the uplink ports can be fixed fibre, SFP or 10/100/1000 RJ-45 copper ports.
Redundant fibre uplinks are supported in models with two fibre ports – ideal for critical applications that require protection and restoration in the event of a fibre failure. The second fibre port can also be used to connect multiple media converters.
Dual Device Mode is also supported, enabling the OmniConverter GPoE+/S to operate as two independent and isolated Ethernet Media Converters. In this mode, the GPoE+/S provides independent and separate data traffic paths between the two uplink ports and two user ports.
Link modes and PoE power reset functions are configurable features that, if enabled allow the connected PD device to be rebooted remotely – eliminating the need for costly site visits. When a problem with the powered device is detected, the fibre ports on the module can be disconnected, triggering the PoE reset function.
Network administrators can also be notified of network outages by configuring the link modes to propogate loss of link faults to managed devices.
The OmniConverter GPoE+/S support 100Mbps fixed fibre, and 100/1000Mbps SFP transceiver receptacles, easily enabling adaptability to different fibre types, distances and wavelengths. The GPoE+/S also supports 10/100/1000 SGMII or 1Gbps SERDES copper transceivers along with CWDM and DWDM fibre transceivers in a variety of distances and fibre types.
The GPoE+/S can be desktop, wall or DIN rail mounted (using the optional DIN-rail mounting kit). They can also be mounted on a 1U 19″ rack-mount shelf.
Power options are DC input power via terminal connectors, or an external 100 – 240V AC power adapter.
Features
- IEEE 802.3af/at multi-port Gigabit Media Converter
- Compact size
- Dual Device mode for operating as two separate media converters
- Directed Switch mode prevents flooding of multicast video traffic
- Configurable PoE Power Reset
- Uplink redundancy on models with two uplink ports
- Two SFP or two 10/100/1000 RJ-45 uplink ports
- Supports 10/100/1000 and 1G copper SFP transceivers
- Supports 100Mbps and 1000Mbps fibre SFPs
- One ST or SC fixed Gigabit fibre connectors
- One or two 10/100/1000 RJ-45 PoE/PoE+ user ports
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
- TAA, BAA and NDAA compliant, and Made in the USA
- Lifetime Warranty and free 24/7 Technical Support
| Description | OmniConverter® GPoE+/S 10/100/1000BASE-T to 1000BASE-X or 100BASE-X Fiber Media Converter with PoE+ | |||
|---|---|---|---|---|
Standard Compliances | IEEE 802.3, IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max) | |||
Regulatory Compliances (Pending) | Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 (Magnetic Field) 30A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP30D Protection ACT: TAA, BAA,NDAA | |||
Environmental | RoHS, WEEE, REACH | |||
PoE Power Modes | IEEE Alterative A (Alt A) | |||
Frame Size | Up to 10,240 bytes | |||
Port Types: | Copper: 10/100/1000BASE-T (RJ-45) Fiber: 100BASE-X (SFP), 1000BASE-X (ST, SC, LC, SFP), 10/100/1000 SGMII (RJ-45 SFP), 1G SERDES (RJ-45 SFP) | |||
Cable Types | Copper: EIA/TIA 568A/B, Cat 5 UTP and higher Fiber: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm | |||
| AC Power Requirements (Models with AC/DC Adapters) | 1 RJ-45 Port 100 – 240VAC/50 to 60Hz 0.33A @ 120VAC (typical) | 2 RJ-45 Ports 100 – 240VAC/50 – 60Hz 0.62A @ 120VAC (typical) | ||
| DC Power Requirements (Models with DC Terminals) | 1 RJ-45 Port +/-46 to +/-57VDC; 0.62A @ 56VDC 2 Pin Terminal (isolated) | 2 RJ-45 Ports +/-46 to +/-57VDC; 1.16A @ 56VDC 2 Pin Terminal (isolated) | ||
| A minimum DC input voltage of 50VDC is required to guarantee 25.5 watts (802.3at) at the end of 100 meters of Cat 5 or better | ||||
| Dimensions (W x D x H) | 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm) | |||
| Weight | Module Only: 1.0 lbs. (453.6 grams) Module w/ Adapter: 1.9 lbs. (852.6 grams) | |||
| Operating Temperature (See Temperature Derating Table) | Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Extended: -40 to 75°C (-20°C AC cold start) Storage: -40 to 80°C | |||
| Humidity | 5 to 95% (non-condensing) | |||
| Altitude | -100m to 4,000m | |||
| MTBF (hours) | Module Only: 584,000 AC/DC Adapter: 100,000 | |||
| Warranty | Lifetime warranty with 24/7/365 free Technical Support | |||
Power / Voltage Requirements and Specifications per IEEE
| Description | IEEE 802.3af PoE | IEEE 802.3at PoE+ |
|---|---|---|
| Power Supply Voltage Range | 46.0 to 57.0 VDC | 51.0 to 57.0 VDC |
| Voltage Range at PSE port Output | 44.0 to 56.0 VDC | 50.0 to 56.0 VDC |
| Maximum Power from PoE/PSE port | 15.4 watts | 30 watts |
| Minimum Voltage at PoE/PD port input* | 37.0 VDC | 42.5 VDC |
| Minimum Power at PoE/PD port* | 12.95 watts | 25.5 watts |
Daisy Chain Application
By connecting via uplink ports, the OmniConverter media converters can be used in daisy-chain applications.
Each OmniConverter media converter provides connectivity to the fibre ports, and power to PD devices at each location along the daisy chain.
Dual Device Mode Application
When two isolated network domains share a single network distribution location, the Dual Device feature is extremely useful.
The example below demonstrates this where a surveillance security network (shown in green) and a Wi-Fi network (shown in purple) are sharing a single distribution location.
Using the two uplinks and the Dual Switch mode facilitates using a single PoE media converter driving both the Cameras and Wi-Fi Access Points while maintaining isolation between the networks.
