RuggedNet® 10G/Mi
Managed Industrial 6 and 10 Port 10Gigabit Ethernet Switch
The RuggedNet 10G/Mi is a ruggedized, managed industrial Ethernet switch offering two 1/10G uplink ports and four or eight 10/100/1000 RJ-45 user ports. It facilitates industrial network distance extension via fiber or copper cabling.
As a Layer 2 Ethernet switch, the RuggedNet 10G/Mi routes frames to ports based on MAC addresses.
It features a Directed Switch mode that channels multicast traffic, like video, solely to designated uplink ports, preventing overflow to other ports.
The device supports redundant uplinks, Media Redundancy Protocol (MRP), Spanning Tree protocol, and daisy-chain setups for robust industrial network applications.
Its Dual Device mode allows the 10G/Mi to function as two separate Ethernet switches, providing distinct data paths between each uplink port and associated user ports.
Operational modes are configurable via DIP-switches or through Web, Telnet, SSH, SNMPv1/v2c/v3, or Serial Console interfaces, with support for both IPv4 and IPv6. These interfaces offer access to various filtering and security features, including broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+, and Access Control Lists, along with email notifications and alarm reporting.
The switches come with Small Form Pluggable (SFP) transceiver receptacle ports, compatible with 10/100/1000BASE-T, 1000BASE-T, and 10GBASE-T copper transceivers, as well as 1G and 10G multimode or single-mode fiber, dual or single-fiber, and standard, CWDM, and DWDM wavelengths.
An alarm relay is present for detecting user-specified events, with configurable contacts for normally open or closed operations. Additionally, there is an input for external event detection, such as an open door.
The RuggedNet switches can be wall, rack or DIN-Rail mounted, and area available with dual DC power inputs.
- Managed Industrial 1/10G Ethernet Switch with dual DC power
- Two 1/10G SFP/SFP+ transceiver uplink ports
- Supports copper and fibre SFP transceivers
- Supports 10M, 100M, 1G and 10Gbps copper SFP/SFP+ transceivers
- Four or eight 10/100/1000 copper user ports
- Supports jumbo frames up to 10,240 bytes
- Management via Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
- Easy to use Hierarchical Command Line Interface
- SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
- Supports IPv4 and IPv6 addressing
- IEEE 802.1x, RADIUS, TACACS+ and ACL
- Email Notification
- Rapid and Multiple Spanning Tree Protocol
- IEC 62439-2 Industrial Ring Media Redundancy
- IEEE 802.1ax LAG and LACP; Active/Active and Active/Standby
- Dual Device mode for operating as two separate switches
- Directed Switch mode AKA Camera mode to prevent port flooding
- Alarm contacts and sensors
- Industrial (-40 to 75º C) operating temperature
- TAA, BAA and NDAA compliant, and Made in the USA
- Free 24/7/365 Technical Support
ADDITIONAL FEATURES
- IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
- Port Access Control for enhanced security
- Broadcast / Multicast / Unicast Storm Prevention
- DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
- IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
- Rate Limiting, Queue prioritization and Class of Service
- IEEE 802.1ab Link Layer Discovery Protocol
- Static MAC configuration and blocking of unknown Unicast/Multicast addresses
- SNTP / NTP and time of day
- Wall, Rack and DIN-rail mountable
- Fan-less design
| Description | RuggedNet® 10G/Mi 10/100/1000BASE-T with 1/10G Uplink Ports Ruggedized Managed 6 and 10 Port 10Gigabit Ethernet Switch | |
|---|---|---|
| Standard Compliances | EEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, IEEE 802.1ax, IEEE 802.1w RSTP/MSTP RFC 5424, RFC 4541, RFC 2710, IEC 624339-2, SMTP, SNTP, RADIUS, TACACS+, IEEE 802.1x | |
| Regulatory Compliances (*Pending) | Safety*: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m (on UTP cabling) and 20 V/m (on STP cabling) IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 ( Magnetic Field), 30A/m, IEC 61000-4-11 (General Immunity in Industrial Environments) IP Rating: IP40 Protection ACT: TAA, BAA, NDAA | |
| Environmental | REACH, RoHS and WEEE | |
| Management | IPv4 and IPv6 address Web, Telnet, SSH, SNMPv1/v2c/v3 In-Band management via Ethernet port Out-of-band management via serial port | |
| Frame Size | Up to 10,240 bytes | |
| Port Types | Copper: 10/100/1000BASE-T (RJ-45)
10GBASE-T Copper Transceivers 1000BASE-X Fiber Transceivers 1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers Serial: RJ-45 | |
| Cable Types | Copper: EIA/TIA 568A/B, Cat 5 UTP and higher
Single-mode: 9/125µm Serial: Category 3 and higher | |
| DC Power Requirements | 4 RJ-45 Ports: +12 to +57VDC; 0.81A @ 12VDC 0.20A @ 48VDC 2 Pin Terminal (isolated) | 8 RJ-45 Ports: +12 to +57VDC; 0.90A @ 12VDC 0.22A @ 48VDC 2 Pin Terminal (isolated) |
| Alarm Contact (Output) | 2 form C Relay for Normally Open and Normally Closed Operation 110VDC/125VAC Maximum Voltage 2A Maximum Current | |
| Alarm Sensor (Input) | 2.0ma @ 3.3VDC Closure Detection | |
| Dimensions (W x D x H) | 1.5” x 5.5” x 5.5” (38.1 mm x 139.7 mm x 139.7 mm) | |
| Weight | 4 RJ-45 Ports: 1.70 lb. (772 grams) | 8 RJ-45 Ports: 1.77 lb. (803 grams) |
| Operating Temperature | Extended: -40 to 75°C Storage: -40 to 80°C | |
| Humidity | 5% to 95% (non-condensing) | |
| Altitude | -100m to 4,000m (operational) | |
| MTBF (hrs) | 285,000 | |
| Warranty | 5 year product warranty with 24/7/365 free Technical Support | |
Dual Device Mode Application
The Dual Device feature proves highly beneficial for two separate network domains that utilize a common network distribution point.
In the illustrated scenario, the Quality Control (green) network and the Manufacturing (purple) network converge at a single hub distribution site. Employing dual uplinks and the Dual Switch mode enables a solitary switch to manage both the Quality Control and Manufacturing devices, all the while preserving network segregation.
Daisy-Chain and Ring Topology Network Application
This scenario illustrates the daisy-chaining and ring functionalities of RuggedNet switches. In this setup, each RuggedNet switch is connected to adjacent switches through its uplink ports, forming a closed ring. The switches facilitate connectivity between workstations and the router. Employing this network structure along with ring protection protocols like Media Redundancy Protocol (MRP) or Rapid Spanning Tree Protocol (RSTP) ensures a robust network essential for mission-critical applications.
