RuggedNet® 10GMG/Mi

Managed Industrial Multi-Gigabit/Multi-Rate 100M, 1G, 2.5G, 5G, 10G Ethernet Switch

RuggedNet 10GMG/MI

The RuggedNet 10GMG/Mi switches are managed industrial multi-gigabit Ethernet switches that come with a 1/10G SFP/SFP+ or multi-gigabit/multi-rate RJ-45 uplink port, alongside two multi-gigabit/multi-rate RJ-45 and two 10/100/1000 RJ-45 downlink/access ports.

These RJ-45 user ports are capable of multi-gigabit/multi-rate speeds ranging from 100Mbps to 10Gbps.

Featuring a Small Form Pluggable (SFP) transceiver receptacle port, the RuggedNet switches support a diverse array of copper and fiber transceivers. They accommodate 10/100/1000BASE-T, 1000BASE-T, 2.5GBASE-T, 5GBASE-T, and 10GBASE-T copper transceivers, as well as 1G and 10G multimode or single-mode fiber transceivers across standard, CWDM, and DWDM wavelengths.

Directed Switch mode is supported by all models, channeling multicast traffic like video exclusively to the designated uplink port to prevent network port congestion.

Operation modes can be set via DIP-switches or through Web, Telnet, SSH, SNMPv1/v2c/v3, or Serial Console management interfaces, which support both IPv4 and IPv6. These interfaces allow for various filtering and security settings, including broadcast storm prevention, IGMP, IEEE 802.1x, RADIUS, TACACS+, and Access Control Lists, with the addition of email notifications and alarm reporting.

An alarm relay for detecting user-specified events is also present, with configurable normally open or normally closed operations. There’s also an alarm input for external event detection, such as a door being opened or closed.

Mounting options for all models include wall or rack mounting with a bracket and shelf, or DIN-rail mounting with the provided clip. Dual DC input power is available for these switches.

  • Managed Industrial 10G multi-gigabit/multi-rate Ethernet Switch
  • One SFP/SFP+ transceiver uplink port or multi-gigabit/multi-rate copper port
  • SFP/SFP+ uplink port supports copper and fiber transceivers
  • Multi-gigabit/multi-rate ports supports speeds of 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps
  • Two multi-gigabit/multi-rate RJ-45 and two 10/100/1000 RJ-45 downlink/access ports
  • Supports jumbo frames up to 10,240 bytes
  • Management via IPv4, IPv6, Web, Telnet, SSH, SNMPv1/v2c/v3 and serial interfaces
  • Easy to use Hierarchical Command Line Interface
  • SNMP management via Omnitron’s NetOutlook® management software, or third-party SNMP software
  • Directed Switch mode AKA Camera mode to prevent port flooding
  • Alarm contacts and sensors
  • AC to DC Power Adapter or 2-Pin DC terminal
  • Wall, Rack and DIN-rail mountable
  • Industrial (-40 to 75º C) operating temperature
  • TAA, BAA and NDAA compliant, and Made in the USA
  • Free 24/7/365 Technical Support


  • IEEE 802.1x, RADIUS, TACACS+ and ACL
  • Email Notification
  • IPv4 Internet Group Management (IGMP) and IPv6 Multicast Listener Discovery (MLD) snooping
  • DHCP Relay Option 82, DHCPv6 and DHCPv6 Relay
  • IEEE 802.1ab Link Layer Discovery Protocol
  • Rate Limiting, Queue prioritization and Class of Service
  • IEEE 802.1Q VLAN tagging and IEEE 802.1ad Q-in-Q
  • Broadcast / Multicast / Unicast Storm Prevention
  • Static MAC configuration and blocking of unknown Unicast/Multicast addresses
  • SNTP / NTP and time of day

RuggedNet® 10GMG/Mi

Managed Industrial 10Gigabit Multi-Gigabit/Multi-Rate Ethernet Switch

Standard CompliancesIEEE 802.3, IEEE 802.1Q, IEEE 802.1ad, IEEE 802.1ab, RFC 5424, RFC 4541, RFC 2710, IEC 624339-2, SMTP, SNTP, RADIUS, TACACS+, IEEE 802.1x
Regulatory Compliances

Safety:  UL 62368-1, UL 60950-1,

              IEC 62368-1, IEC 60950-1,

              EN 62368-1, EN 60950-1,

              CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1,

              CE Mark, UKCA

EMC:     EN 55032/24 CE Emissions/Immunity,

              IEC 61000-6-4 Industrial Emissions,

              IEC 61000-6-2 Industrial Immunity

EMI:      CISPR 32,

              FCC 47 Part 15 Subpart B Class A

EMS:     IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV,

              IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m (on UTP cabling) and 20 V/m (on STP cabling)

              IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV,

              IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV,

              IEC 61000-4-6 CS: Signal: 10 V,

              IEC 61000-4-8 ( Magnetic Field), 30A/m,

              IEC 61000-4-11 (General Immunity in Industrial Environments)

IP Rating: IP40 Protection


EnvironmentalREACH, RoHS and WEEE

IPv4 and IPv6 address

Web, Telnet, SSH, SNMPv1/v2c/v3

In-Band management via Ethernet port, Out-of-band management via serial port

Frame SizeUp to 10,240 bytes
Port Types

Copper:     100/1000BASE-T, 2.5GBASE-T/5GBASE-T/10GBASE-T (RJ-45)

                   10/100/1000BASE-T (RJ-45)

SFP/SFP+: 10GBASE-X Fiber Transceivers,

                   10GBASE-T Copper Transceivers 1000BASE-X Fiber Transceivers,

                   1000BASE-T Copper Transceivers 10/100/1000BASE-T SGMII Copper Transceivers

                   100/1000/2.5G/5G/10GBASE-T Multi-rate Copper Transceivers

Serial:         RS-232 (RJ-45)

Cable Types

Copper: Twisted-pair cable up to 100 meters

              10BASE-T: 4-pair UTP Cat 3, 4, 5, 5e, 6, 6A

              100BASE-TX: 4-pair UTP Cat 5, 5e, 6, 6A

              1G/2.5G: 4-pair UTP Cat 5e, 6, 6A, 7

              5G: 4-pair UTP Cat 6, 6A, 7

              10G: 4-pair UTP Cat 6A, 7

Fiber:    Multimode: 50/125, 62.5/125µm

              Single-mode: 9/125µm

DC Power Requirements

+12 to +57VDC;

0.93A @ 12VDC

0.23A @ 48VDC

2 Pin Terminal (isolated)

Alarm Contact (Output)

2 form C Relay for Normally Open and Normally Closed Operation

110VDC/125VAC Maximum Voltage

2A Maximum Current

Alarm Sensor (Input)

2.0ma @ 3.3VDC Closure Detection

Dimensions (W x D x H)1.5” x 5.2” x 5.5” (38.1 mm x 132.1 mm x 139.7 mm)
Weight1.5 lbs. (680 grams)
Operating TemperatureIndustrial: -40 to 75°C
Storage: -40 to 80°C
Humidity5% to 95% (non-condensing)
Altitude-100m to 4,000m (operational)
MTBF (hrs)229,000
5 year product warranty with 24/7/365 free Technical Support

Security & Small Cell Application

In this example of an industrial manufacturing application, IP cameras and Wi-Fi 6/6E Access Points are deployed throughout a vast manufacturing facility. A fiber link from the control room is distributed to RuggedNet switches featuring a fiber SFP port via an iConverter® XM5 aggregation fiber switch.

Each RuggedNet 10GMG/Mi switch offers a fully managed solution for an IP camera and a Wireless Access Point, both of which can be situated up to 100 meters away from the switches.

The camera and access point are capable of utilizing full bandwidth, thanks to the 10G fibre uplink port available on each 10GMG/Mi switch.

Ceiling Application RuggedNet 10GMG


Small Cell

The demand for bandwidth from small cell devices is growing, with speeds of 10Gbps becoming the norm for today’s equipment.

In a typical application, high-speed small cell devices that require bandwidths of up to 10Gbps are installed around multiple buildings. An iConverter® XM5 aggregation fiber switch distributes a fiber link to each RuggedNet switch.

The RuggedNet 10GMG/Mi switches offer a managed solution, supporting speeds of up to 10Gbps on the RJ-45 user ports.


Small Cell Application RuggedNet 10GMG


Scroll to Top