OmniConverter® FPoE+/S
10/100 Media Converter with Power over Ethernet (PoE or PoE+) Enhanced Version
Features
- IEEE 802.3af/at multi-port Fast Ethernet Media Converter
- Compact size
- Dual Device mode for operating as two separate media converters
- Directed Switch mode prevents flooding of multicast video traffic
- Configurable PoE Power Reset
- Uplink redundancy on models with two uplink ports
- Two 100Mbps SFP or two 10/100 RJ-45 uplink ports
- One ST or SC fixed Fast Ethernet fiber connectors
- One or two 10/100 RJ-45 PoE/PoE+ user ports
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
- TAA, BAA and NDAA compliant, and Made in the USA
- Lifetime warranty and free 24/7/365 Technical Support
| Description | OmniConverter FPoE+/S 10/100BASE-T to 100BASE-X Fiber Media Converter with PoE+ | ||
|---|---|---|---|
| Standard Compliances | IEEE 802.3, IEEE 802.3af (15.40 watts), IEEE 802.3at (30 watts) | ||
Regulatory Compliances (Pending) | Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 (Magnetic Field) 30A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP30D Protection ACT: TAA, BAA,NDAA | ||
| Environmental | REACH, RoHS and WEEE | ||
| PoE Power Modes | IEEE Alterative A (Alt A) | ||
| Frame Size | Up to 10,240 bytes | ||
| Port Types | Copper: 10/100BASE-T (RJ-45) Fibre: 100BASE-X (ST, SC, SFP) | ||
| Cable Types | Copper: EIA/TIA 568A/B, Cat 5 UTP and higher Fibre: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm | ||
| AC Power Requirements (Models with AC/DC Adapters) | 1 RJ-45 Port: 100 – 240VAC/50 to 60Hz, 0.33A @ 120VAC (typical) | 2 RJ-45 Ports: 100 – 240VAC/50 – 60Hz, 0.62A @ 120VAC (typical) | |
| DC Power Requirements (Models with DC Terminals) | 1 RJ-45 Port: +/-46 to +/-57VDC, 0.78A @ 56VDC 2 Pin Terminal (isolated) | 2 RJ-45 Ports: +/-46 to +/-57VDC, 1.45A @ 56VDC 2 Pin Terminal (isolated) | |
| A minimum DC input voltage of 50VDC is required to guarantee 25.5 watts (802.3at) at the end of 100 meters of Cat 5 or better | |||
| Dimensions (W x D X H) | 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm) | ||
| Weight | Module Only: 1.0 lbs. (453.6 grams) Module w/ Adapter: 1.9 lbs. (852.6 grams) | ||
Operating Temperature (See Temperature Derating Table) | Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Extended: -40 to 75°C (-20°C AC cold start) Storage: -40 to 80°C | ||
| Humidity | 5 to 95% (non-condensing) | ||
| Altitude | -100m to 4,000m | ||
| MTBF (hrs) | Module: 584,000 AC/DC Adapter: 100,000 | ||
| Warranty | Lifetime warranty and free 24/7/365 Technical Support | ||
Dual Device Mode Application
The Dual Device feature is useful when two isolated network domains share a single network distribution location.
The example below shows a scenario where the security network (shown in green) and Wi-Fi network (shown in purple) share a single hub distribution location.
Using the two uplinks and the Dual Switch mode means one PoE Media Converter can drive both the Cameras and Wi-FI Access points, while maintaining isolation between the networks.
