OmniConverter® GPoEBT/S
10/100/1000 Media Converter with Power over Ethernet (60W and 100W) PoE Enhanced Version
The OmniConverter GPoEBT/S are multiport Ethernet media converters, supporting IEEE802.3BT 60 and 100W PoE, and featuring one or two uplink ports and one or two 10/100/1000 RJ-45 PoE user ports.
PoE power is supported up to 100W per RJ-45 user port, along with frame sizes up to 10,240 bytes.
Uplink port options are fixed fibre, SFP, or 10/100/1000 RJ-45 copper ports.
Directed Switch Mode which directs multicast traffic to only the appropriate uplink port is also supported – preventing multicast traffic from flooding other network ports.
Models with two fibre ports support redundant fibre uplinks for critical applications that require protection and restoration in the event of fibre failure.
This second fibre port can also be used to cascade multiple media converters.
These models with two fibre ports also support Dual Device Mode – enabling the OmniConverter to operate as two indepenent and isolated Ethernet media converters. In this mode, the GPoEBT/S provides separate and independent data traffic paths between the two uplink ports and two user ports.
Link modes, and PoE power reset are configurable features on the GPoEBT/S. The Power reset feature can be used to remotely reset a PD device, removing the need for a costly site visit, whereas the link modes can be configured to propogate loss-of-link faults to managed devices, notifying administrators immediately of network outages.
Fixed fibre connectors and 100/1000Mbps SFP transceivers are supported, enabling easy adaptability to different fibre types, distances and wavelengths.
10/100/1000 SGMII or 1Gbps SERDES copper transceivers, along with 100/1000Mbps standard, CWDM and DWDM fibre transceivers are also supported, in a variety of distances and fibre types.
Features
- IEEE 802.3bt 60W and 100W multi-port Gigabit Media Converter
- Compact size
- Dual Device mode for operating as two separate media converters
- Directed Switch mode prevents flooding of multicast video traffic
- Configurable PoE Power Reset
- Uplink redundancy on models with two uplink ports
- Two SFP or two 10/100/1000 RJ-45 uplink ports
- Supports 10/100/1000 and 1G copper SFP transceivers
- Supports 100Mbps and 1000Mbps fiber SFPs
- One ST or SC fixed Gigabit fiber connectors
- One or two 10/100/1000 RJ-45 PoE/PoE+ user ports
- Commercial (0º to 50ºC), wide (-40º to 60ºC) and extended (-40º to 75ºC) operating temperature ranges
- TAA, BAA and NDAA compliant, and Made in the USA
- Lifetime Warranty and free 24/7 Technical Support
| Description | OmniConverter GHPoEBT/S 10/100/1000BASE-T to 1000BASE-X or 100BASE-X Fibre Media Converter with 60W or 100W | ||
|---|---|---|---|
| Standard Compliances | IEEE 802.3, IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max), IEEE 802.3bt (60 and 100 watts max) | ||
Regulatory Compliances (Pending) | Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 (Magnetic Field) 30A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP30D Protection ACT: TAA, BAA,NDAA | ||
| Environmental | RoHS, WEEE, REACH | ||
| PoE Power Modes | IEEE Alterative A (Alt A) and 4 pair | ||
| Frame Size | Up to 10,240 bytes | ||
| Port Types | Copper: 10/100/1000BASE-T (RJ-45) Fibre: 100BASE-X (SFP) 1000BASE-X (ST, SC, LC, SFP) 10/100/1000 SGMII (RJ-45 SFP) 1G SERDES (RJ-45 SFP) | ||
| Cable Types | Copper: EIA/TIA 568A/B, Cat 5 UTP and higher Fibre: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm | ||
| AC Power Requirements (Models with AC/DC Adapters) | 60W Model – 1 RJ-45 Port 100 – 240VAC/50 – 60Hz, 0.61A @ 120VAC (typical) | 100W Model – 1 RJ-45 Port 100 – 240VAC/50 – 60Hz, 0.99A @ 120VAC (typical) | |
60W Model – 2 RJ-45 Ports 100 – 240VAC/50 – 60Hz, 1.18A @ 120VAC (typical) | 100W Model – 2 RJ-45 Ports 100 – 240VAC/50 – 60Hz, 1.94A @ 120VAC (typical) | ||
| DC Power Requirements (Models with DC Terminals) | 60W Model – 1 RJ-45 Port +/-46 to +/-57VDC, 1.15A @ 56VDC 2 Pin Terminal (isolated) | 100W Model – 1 RJ-45 Port +/-46 to +/-57VDC, 1.88A @ 56VDC 2 Pin Terminal (isolated) | |
60W Model – 2 RJ-45 Ports +/-46 to +/-57VDC, 2.23A @ 56VDC 2 Pin Terminal (isolated) | 100W Model – 2 RJ-45 Ports +/-46 to +/-57VDC, 3.67A @ 56VDC 2 Pin Terminal (isolated) | ||
| Dimensions (W x D x H) | 3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm) | ||
| Weight | Module Only: 1.0 lbs.; 453.6 grams Module w/ Adapter: 1.8 lbs.; 816.4grams | ||
| Operating Temperature* | Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Extended: -40 to 75°C (-20°C AC cold start) Storage: -40 to 80°C | ||
| Humidity | 5% to 95% (non-condensing) | ||
| Altitude | -100m to 4,000m | ||
| MTBF (hrs) | Module Only: 584,000 AC/DC Adapter: 100,000 | ||
| Warranty | Lifetime warranty with 24/7/365 free Technical Support | ||
Security & Wireless
In this example – IP surveillance cameras and Wi-FI Access Points are installed through a facility. The fibre link is distributed throughout the facility from a network switch where OmniConverter media converters with dual fibre ports are connected.
The second fibre port on the OmniConverter is used to daisy-chain the fibre to the next location, where another OmniCOnverter with one fibre port terminates the fibre and converts to copper.
The OmniConverter media converter provides Power over Ethernet (PoE) over UTP cables to an IP camera and Wi-Fi Access Point at each location, each of which can be located up to 100m from the media converter.
Some cameras with heaters / blowers or pan/tilt/zoom motors require 60W or 100W. The OmniConverter can be used to power these devices.
